Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Computers & Technology > Hardware > Other Hardware   »   Ethernet Hub -- How do they work?

 
Question Tools Search this Question Display Modes
Question
 
 
#1  
Old Apr 23, 2008, 03:12 AM
macnext1
Junior Member
macnext1 is offline
 
Join Date: Mar 2008
Posts: 30
macnext1 See this member's comment history on his/her Profile page.
Ethernet Hub -- How do they work?

According to the reading I have done, an Ethernet hub is basically a signal splitter. It takes a signal coming in on any port and broadcasts it to all the other hubs. That is why computers hooked up to a hub have to be able to handle collisions. I don't have multiple computers; I have 2 modems, 1 satellite and 1 DSL. I would like to hook my computer and both modems up an Ethernet Hub. I would then power one of the modems off so I would basically just have a feed-through from my computer to the hub to the modem and out to the world. Thoughts? Suggestions? Help? Thanks for whatever thoughts you may have on this topic.

Reply With Quote
 
     

Answers
 
 
Old Jul 8, 2008, 12:11 PM   #2  
Scleros
Hardware Expert
Scleros is offline
 
Join Date: Feb 2007
Location: Virginia USA
Posts: 744
Scleros See this member's comment history on his/her Profile page.
A hub is more of a multiport repeater than a splitter. They take what's received on one port and retransmit it on all the others. Most such devices today are switches that learn the devices on each port and only retransmit packets on the appropriate port.

What are you trying to achieve?

Comments on this post
KeepItSimpleStupid agrees: Good answer. I'll add Uplink ports just have xmit and receive reversed
  Reply With Quote
 
     
 
 
Old Jul 8, 2008, 12:20 PM   #3  
KeepItSimpleStupid
Engineering & Electronics Expert
KeepItSimpleStupid is offline
 
KeepItSimpleStupid's Avatar
 
Join Date: Aug 2007
Posts: 4,224
KeepItSimpleStupid See this member's comment history on his/her Profile page.KeepItSimpleStupid See this member's comment history on his/her Profile page.KeepItSimpleStupid See this member's comment history on his/her Profile page.
Auto MI-DX (I forget the acronym) ports automatically determine if the pairs used for transmit and recieve.
  Reply With Quote
 
     
 
 
Old Jul 9, 2008, 05:04 AM   #4  
macnext1
Junior Member
macnext1 is offline
 
Join Date: Mar 2008
Posts: 30
macnext1 See this member's comment history on his/her Profile page.
What I'm trying to achieve is to be able (easily) to switch from one modem (ISP) to another. I tried using a splitter (RJ45?) but I still have to disconnect one or the other, I can't just leave them plugged in and power off the one I don't want. That is what I would like to be able to do (getting too stiff in the joints to enjoy crawling under the desk). Since a hub as you describe it sounds like it might repower the signal perhaps that would work. What do yawl think?
  Reply With Quote
 
     
 
 
Old Jul 9, 2008, 05:28 AM   #5  
ScottGem
Computer Expert
ScottGem is offline
 
ScottGem's Avatar
 
Join Date: Jan 2003
Location: LI, NY - USA
Posts: 22,927
ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.ScottGem See this member's comment history on his/her Profile page.
Pay to call ScottGem for advice ($.75/min)
Call ScottGem via Skype™
Why would you have two ISPs?

But if you only have ONE computer, then you could get a switch (hard to find plain hubs nowadays), connect both modems and the PC to the switch, and just power on the modem you want to use.
  Reply With Quote
 
     
 
 
Old Jul 9, 2008, 06:40 AM   #6  
KeepItSimpleStupid
Engineering & Electronics Expert
KeepItSimpleStupid is offline
 
KeepItSimpleStupid's Avatar
 
Join Date: Aug 2007
Posts: 4,224
KeepItSimpleStupid See this member's comment history on his/her Profile page.KeepItSimpleStupid See this member's comment history on his/her Profile page.KeepItSimpleStupid See this member's comment history on his/her Profile page.
What you can do is get yourself some software that allows multiple Ethernet configurations or two Ethernet cards.

Configure the systems (Satelite, DSL) with different gateways. Configure the connections in Windows with the gateways. When you select the appropriate connection, the gateway determines the route.

I've never seen a Satelite modem, so I don't know if it would work. This would work if you had a DSL and cable modem.
  Reply With Quote
 
     


Question Tools Search this Question
Search this Question:

Advanced Search
Display Modes

 
Similar Sponsors

Similar Questions
Question Asker Topic Answers Last Post
Ethernet is not working jaspreet2142 Networking 7 Jan 3, 2008 10:44 AM
Does an ethernet connection work for gaming without being online? joys_uk4multiplayer Networking 1 Nov 12, 2007 02:51 PM
What is Ethernet/LAN? What do I use? czepp Networking 4 Jan 30, 2007 08:37 AM
ethernet cable marsha2437 Networking 3 Jun 13, 2006 06:33 PM
RS-485 Vs Ethernet cleancondenser Networking 1 Feb 25, 2006 05:19 AM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 10:22 PM.

Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.