Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wago connectors
[ 4 Answers ]
Any thoughts out there on these push on type connectors?
Main Stack No Hub Connectors
[ 8 Answers ]
2 issues here... 1. The plumbing inspector told me that the 2 no hub connectors show here are not code. This is the main vent stack, 4" cast iron to 4" Schedule 40 PVC. What is an approved connector that complies with International Plumbing Code 2003? 2. The 2" cast iron vent pipe you can...
Hot Water Tank Connectors
[ 4 Answers ]
Are these 2 setups okay for hot water tanks? Just want to confirm that CPVC is allowed to be used as a connector and that the shut off valves are okay also. 3/4" CPVC is used on one tank and 1/2" CPVC on the other. Is this okay? If any of this wrong, please quote the code to correct it in...
Romex connectors
[ 1 Answers ]
Going into the main breaker panel, can you put 2 romex wires through one romex connector (3/8") Also if allowed, can you run (1) 6/3 and (1) 8/3 romex wire through a 1" romex connector? Thanks all.
Crimp connectors
[ 1 Answers ]
What’s the proper way to install crimp connectors? Not butt splice connectors, I have used those many times. These connectors (made by GardnerBender) are plain metal and look like short pieces of tube. The instructions are confusing: insert wires, twist together then crimp. Are both wires... View more questions Search
|