 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wind Load
Can someone please tell me how to calculate the wind load for a sign that is going in at my Dad' office. I don't have a copy of the International Building Code, or ASCE 7.02.
The sign is 7' x 2', with 4 4"x6"'s that will hold up the sign in 2' concrete. The sign itself is 14 ft^2, and I came up with a total surface area with the posts of 22.1666 ft^2. I would be happy to email a spec sheet in pdf format to anyone that could help. I was going to just use 20 lb/ft^2 for a surface under 70 elevation but I wasn't sure if it would be correct. The total height is only 9'. Thanks, Josh |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Does anyone out there know how to calculate the wind load on a wooden fence? I have used 12 foot 4 x 4 pressure treated posts set in 4 feet of concrete spaced 8 feet apart. The concrete was poured in a 12 inch in diameter concrete tube. I used a strong concrete mix in the ratio 3:2:2. I want to use...
Have set up a small Fire Training Facility in Florida and have been asked to give the side wind load in MPH. Unit is 4 steel ocean containers stacked two high side by side and welded together and welded to concrete piers that are 36" deep and 19" in diameter. Whole unit set up is 17' tall x 16'...
How can I calculate wind load on anchor bolts for chain link fence posts? Then, how to calculate same load if posts are anchored and buried in 30" of concrete?
View more questions Search
|
