Gain adjustment in chilled water valve actuator control systems

pakua Posts: 1, Reputation: 1

New Member

Aug 16, 2010, 01:00 PM

Gain adjustment in chilled water valve actuator control systems

How to adjust the gain in the programme for proper operation of actuator of two way valve? Actuator is not modulating the valve according to set tempreture.

Check out some similar questions!

Threeway control valve location closed loop chilled water system [ 2 Answers ]

Hi all, I am new to this site. Anybody could help me about exact location of threeway control valve in closed loop chilled water system for process cooling. I have doubt about the location, in the inlet of the heatexchanger or out let of the exchanger? Kindly help me. Regards, Sivam

Infra red receiver to control Linear Actuator [ 11 Answers ]

I'm planning on buying a Linear actuator to move my entertainment system's shelves up and down. I would like to be able to control the motor through IR. I have an IR receiver already but I'm wondering if what I'm asking for is even possible. Here's the link to the motor I'm planning on buying: ...

Can closed systems gain weight? [ 8 Answers ]

If there are two organisims in a closed system and they reproduce wouldn't the system gain weight? Yes I know that the third organizim would consume, taking weight away, but theoreticly wouldn't the system gain weight because the cell in that third organizim split and reproduce?

White Rogers Hot Water Control Valve Turns on But Not off [ 3 Answers ]

I have a hot water heating system with three zones. This past summer all three control valves were replace, old ones were leaking, and three new thermostats installed I don't think the system ever worked after the installation but it was summer and we weren't using the heat. The new control...

View more questions Search

Check out some similar questions!

Add your answer here.