Ask Experts Questions for FREE Help !
Ask
    jonboy46's Avatar
    jonboy46 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2010, 09:07 AM
    Can I install a 600 volt single phase circuit in a underfloor concrete raceway with l
    Will the 2008 NEC allow me to install a 600 volt single phase circuit in an underfloor concrete raceway that also has lower voltage control cables if a plastic divider separates the higher voltage wires from the control cables?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Apr 26, 2010, 09:31 AM
    Yes, as long as the divider is UL listed to separate the voltages being utilized.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

208 Volt Single phase vs 230 Volt single phase [ 3 Answers ]

I have a commercial appliance that is rated for 230 volt single phase. All I have available is 208 volt single phase. Will the unit work on 208V or do I have a problem?

I have 480 volt, three phase available. Can I pull 240 volt, single phase off this ? [ 1 Answers ]

Have available 3 phase, 3 leads plus a ground. Need to run 240 volt, single phase connection off the 3 phase. Is this possible without a step down transformer?

Will a 208 volt 3 phase mixer work off a 240 volt 3 phase service? [ 7 Answers ]

I have 240 volt 3 phase service and I have a 208 volt 3 phase mixer. Can I hook it up to the 240 volt 3 phase service? Also I have a 208 volt 3 phase oven will it work for that as well?

Safety regarding 600 amp (Single Phase ) service. [ 5 Answers ]

I have a Single Phase 600 amp service entering my basement below grade level and running into a CT cabinet. Above the cabinet is where the electric meter is located. I need to caulk behind the CT cabinet where the electric cables carrying the 600 amp service from the outside transformer are. Is it...

208 volt3 phase why to single phase 120 volt [ 4 Answers ]

Supply is from 75 kva transformer, 3 phase delta /y three wire feeding a 30 amp breaker. 100 feet down stream is a junction box that I want to tap and produce a 120 v single phase ( 20 amp CB) supply. The junction box feeds a 6 amp motor

View more questions Search