Connect Pantech UM175 wireless broadband modem to Belkin Wireless G router

txladyofthelake · #1 May 17, 2009, 06:39 PM

I have a Pantech UM 175 wireless broadband modem from Millenicom and I am able to hook it up to a laptop running Vista, a laptop running XP, and a PC running XP individually. However, I would like to have it where I can create a network so that any or all of the computers can access the internet at the same time via the Belkin Wireless G router.

Is this possible? I have tried to use the PC as a server with ICS and followed directions on setting it up. But, I cannot get it to work.

I cannot connect the Pantech UM 175 directly into the Belkin Wireless G router because the Pantech has a male USB connection and the router only has ethernet ports?

Can anyone help me with this? Thanks.

txladyofthelake · May 19, 2009, 08:53 AM

Quote:

Originally Posted by chuckhole

You will need to connect your router to your broadband modem. Any connections to the Internet should go via the wireless access point in your router. Do not use the wireless access in your broadband modem.

Thanks for the info. The problem I have is that the broadband modem is a male usb port and the router only has female ethernet ports. Do you know of an an adapter that will allow me to plug the broadband modem directly into the wireless router?

txladyofthelake · May 20, 2009, 05:32 AM

Quote:

Originally Posted by chuckhole

I just looked up your product - the Pantech UM 175 (Verizon Aircard). This is a single PC product and is not meant to be connected to a router. Unlike most Internet modems, it does not ALSO have an RJ-45 ethernet connection. Sorry for that.

The only way you are going to be able to share your Internet connection with this product is to connect with your laptop or desktop PC with the USB connection and then enable Internet Connection Sharing on the PC. Your PC will become the router and DHCP server. Your other router can not be used in this case.

Well, thank you for that information. I have been trying to set up ICS on the PC with no luck, but maybe it is because the router is connected to the PC. I'll keep trying.

txladyofthelake · May 20, 2009, 05:48 AM

Quote:

Originally Posted by chuckhole

They will definitely butt heads with each other

. Both your PC and the router want to be boss in that case. Both would want to be the primary router and DHCP server. There should only be one.

As you can tell, I'm not really an expert at all this

, so before I spend a lot more time trying to get this to work, I need to know one thing. If I get it all set up with the PC as the router, will I be able to connect a laptop to the internet that is located about 150 feet away? The whole object was to try to share an internet connection with my brother.

chuckhole · May 20, 2009, 07:20 AM

If you plan to use your other laptop with wireless, then you can connect your router to the same network and use it as an access point only. You will have to give it a different address than your PC and you will need to disable DHCP on the router as well.

So, if your PC is set to 192.168.1.1, then set your router to 192.168.1.2. Connect the Ethernet port on your PC to one of the available switch ports on the router. You can connect the other laptop to the network via wireless and your Internet connected PC can assign an address to it and share the Internet to it.

txladyofthelake · May 20, 2009, 07:57 AM

Quote:

Originally Posted by chuckhole

If you plan to use your other laptop with wireless, then you can connect your router to the same network and use it as an access point only. You will have to give it a different address than your PC and you will need to disable DHCP on the router as well.

So, if your PC is set to 192.168.1.1, then set your router to 192.168.1.2. Connect the Ethernet port on your PC to one of the available switch ports on the router. You can connect the other laptop to the network via wireless and your Internet connected PC can assign an address to it and share the Internet to it.

Thanks for all of your help Chuckhole. I will try again.

scamatics777 · Oct 27, 2009, 08:43 AM

heres what i did. pluged in pc card to usb. go to network connections on your pc. make sure you have set up a bridged connection (windows will show you how) using the dial up connection created by your pc card and one of your other locations (example im using location 1) this is the ethernet port that is installed in the back of your computer. now plug in a ethernet cord to the back of your computer and then to your routers internet in jack plug in router and you should have your shared connection. im using wireless g linksys. got my room running, my upstairs comp., xbox 360 and living room computer all off of just 1 pc card in the living room with my linksys wireless router. make sure also to go to your network connections properties click on advanced and check the box that allows other network users to connect through this computers internet connection. you may have to restart your computer after this to allow for the change if you dont get shared internet. hope this helps. (FYI. computer in living room is win.xp, room is vista, upstairs is xp home.)