Where to get parts for Dell LCD E207WFP?

darkvision · Mar 3, 2009, 12:21 PM

As advice I gave earlier on a similar issue, something like this your not going to be able to buy the part, so this is where jury rigging comes in. If its a soft plastic try to push something like a thumbtack through so it will make contact, or use superglue and a small piece of plastic(of the same length as the previous contact) to attach to the back so that it makes proper contact again.

mdosh01 · Mar 3, 2009, 12:31 PM

Thanks. I was able to repair the part. It's a poor design of the original part, but my fix seems to be holding.

darkvision · Mar 3, 2009, 03:31 PM

Np. Those kind of switches tend to break because they are after the cheapest way to put it together. They also tend to not sell the little tiny parts, not enough profit, so if you want to fix it its a DIY operation. And if your fix does stop working just redo it

iluvmyputer2 · Dec 2, 2009, 09:01 AM

Mdosh01 - was your on/off button broken completely off the plastic strip? Mine is, can't figure out how to repair.

rudyburman · Mar 17, 2010, 01:26 PM

I had this happen too. Was able to superglue the part together. Spoke with someone at Dell to try and get spare parts and they told me that I have to spend $100 for the ENTIRE screen assembly, that they don't sell the small 50cent part. It IS a poor design. The other 4 buttons are directly in front of the contact. It is only the power button (the MOST USED button) that is cantilevered off to the side. <sigh>. Good Luck!

BobVincentie · Jun 4, 2010, 08:06 PM

Here's a photobucket group of pics of this repair via superglue.

Http://s123.photobucket.com/albums/o286/jlrohio/Dell%20E207WFP%20Flat%20Panel%20Monitor/?start=0

radiomanguy · Dec 10, 2011, 11:57 PM

The part number for the part out of the service manual is a33g0049-sn-ail

Where to get parts for Dell LCD E207WFP?

Add your answer here.

Check out some similar questions!