Question
 | |  | | | 
May 14, 2008, 02:02 PM
| | Junior Member | | Join Date: Nov 2007
Posts: 151
| | | Can't connect--Error 680--No Dial Tone My computer has always worked just fine. I take good proper care of it and scan for viruses everyday. I use dial-up (NetZero is the ISP) and the other night, my husband had just connected and walked away. We were in the living room when we heard the modem dialing up and reconnecting again. This happened about 3 times, the computer kept disconnecting and the modem kept reconnecting. Well finally, he just disconnected and went to bed. **I had just used the computer earlier that day and everything was just fine**
About 2 hrs later, I went to get online and when I click "connect" using my ISP, it tries to connect but says that NetZero cannot detect a dial tone and reads the error 680. I have googled this problem (from another computer) and I have tried everything possible that has been suggested. Checked all the phone lines, changed settings, removed and reinstalled the modem, and I have queried the modem under "diagnostics" and it says the device is working properly. I don't know what else to do!!!! I don't want to have to send my CPU for repairs if it was something minor that I could have fixed myself.
Any suggestions? Please help! I'm going Nuttttsssss!
Thanks in advance! | | | | | | |
Answers
 | |  | | |
May 14, 2008, 02:39 PM
|
#2
| | Ultra Member
Join Date: Jan 2008 Location: Nothinghappenshere
Posts: 4,818
| Try rebooting your computer. Mine does this all the time and the quick fix is rebooting the danged thing as I have a dial up modem as well. Pesky thing. |
| | | | | | |  | |  | | |
May 14, 2008, 05:41 PM
|
#3
| | Engineering & Electronics Expert
Join Date: Aug 2007
Posts: 5,268
| Take the cord that your using from the modem to the wall and connect it to another phone and wiggle the cords at each end while listening to the phone. |
| | | | | | |  | |  | | |
May 20, 2008, 11:27 AM
|
#4
| | Junior Member
Join Date: Nov 2007
Posts: 151
| Thank you to you both for answering my problem. However, I have done both of these things! I have done everything possible I can come up with to solve the problem. Now, I'm just going to replace the modem and see if that works. And if not, I don't have a clue what could be going on..............it may be a while before I can get back on here to let you guys know what happened because I'm having to use the computer at the library, but I'll let you know if the modem was the problem!
Thanks ya'll! |
| | | | | | |  | |  | | |
Jun 3, 2008, 09:46 AM
|
#5
| | New Member
Join Date: Jun 2008
Posts: 2
| Salaam
U really don,t need to replace the modem.Just do what i say
1-go to the my computer properties chosse hardware tab and then chose device manager option
2-A new window will open now seek the modem option double click on that option.
3-A sub menu will open.
4-Now go to the properties of that sub menu
5-another window will open
6-Now chose the modem tab and set maximum port speed at 19200
if this trick will not work then tell me i have another trick much easier than this
but basically proble 680 comes from it. |
| | | | | | |  | |  | | |
Jun 3, 2008, 09:49 AM
|
#6
| | New Member
Join Date: Jun 2008
Posts: 2
| i am 100% sure that if u do this trick u will never face this proble.
if u have replaced your modem than just practicale it because in the future this problem can occur again even i my self have face this problem many times. |
| | | | | | |  | |  | | |
Jun 6, 2008, 01:11 PM
|
#7
| | Junior Member
Join Date: Nov 2007
Posts: 151
| Thanks for your support, however, I have already done this several times. I have contacted Dell and have troubleshooted EVERYTHING they have suggested, EXCEPT change the modem and I plan to change the modem this weekend. What's your other option? Maybe it's something I haven't done already, but I've messed with this computer so much that I'm ready to throw it out the window!!!!
Thanks again! |
| | | | | | |  | |  | | |
Jun 6, 2008, 03:28 PM
|
#8
| | Ultra Member
Join Date: Jan 2008 Location: Nothinghappenshere
Posts: 4,818
| Just a thought. Have you checked the phone connectors inside the box on your house for any corrosion? My dial up goes fruity sometimes due to the corrosion build up on the screws inside the box. My son has to clean the screws at least yearly. |
| | | | | | |  | |  | | |
Jun 7, 2008, 08:12 AM
|
#9
| | Junior Member
Join Date: Nov 2007
Posts: 151
| Quote: |
Originally Posted by twinkiedooter Just a thought. Have you checked the phone connectors inside the box on your house for any corrosion? My dial up goes fruity sometimes due to the corrosion build up on the screws inside the box. My son has to clean the screws at least yearly. |
The phone jack is very old, however, I have hooked the computer up to 3 different phone jacks in the house, and...same problem.
Thanks for your advice.....hopefully I can get the modem installed and see if that works...if not, I'm definitely throwing the 'puter out the window.............
Thanks! Wish me luck! |
| | | | | | |  | |  | | |
Jun 27, 2008, 07:44 PM
|
#10
| | Junior Member
Join Date: Nov 2007
Posts: 151
| Just wanted to let you guys know that replacing the modem corrected my problem! |
| | | | | | | | Thread Tools | | | | Display Modes | Linear Mode |
Similar Threads | | Question | Asker | Forum | Answers | Last Post | | no dial tone | Franca Carls | Landline Phones | 2 | Nov 29, 2007 06:30 PM | | dial tone | thomp | Landline Phones | 9 | Nov 1, 2007 06:27 PM | | no dial tone | dora1 | Landline Phones | 1 | Oct 9, 2007 06:02 PM | | No dial tone | dynamite | Landline Phones | 9 | May 5, 2007 02:20 PM | | No dial tone | mlde | Electrical & Lighting | 2 | Nov 18, 2006 08:39 PM | |