Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
HD 39 Stapler now bends one end of staple
[ 0 Answers ]
I found how to replace the staples on this site (quite a job actually) and now the staple doesn't bend over neatly on one end. I checked and there is no jam. Put them back in as described for Swingline 39 HD Stapler and same issue - worked perfectly before changing the staples (also Swingline #39...
Retaining wall cap stone bends
[ 1 Answers ]
I am having trouble making the cuts for the cap stones on a 90 degree bend using cst block. I have a straight run that makes a sharp 90 degree bend at the end of the wall. I need the caps to line up on the front and back of the cap before it all the way around the bend evenly. I can't have any...
Minimum distance between emt conduit for data and emt conduit for power
[ 1 Answers ]
Minimum distance between emt conduit for data and emt conduit for power?
Sewer line drop and bends
[ 8 Answers ]
I have a sewer line that runs about 75 feet then I have a 45 degree bend to the rest of the line which is about another 75 feet. 2 questions: first, there is plenty of drop as it is downhill all the way, but can it drop too fast? If so what is the maximum drop I would want? Second, is the 45 degree... View more questions Search
|