Ask Experts Questions for FREE Help !
Ask
    tran2100's Avatar
    tran2100 Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2009, 07:10 AM
    Lost usb ports
    I just lost all USB ports ( none of them working), I tried to uninstall, rebooted, ran window recovery but still not working. Internet and internal harddrives are working fine. Needs someone help me on this problem. Tks Tran:mad:
    jeffrey michael's Avatar
    jeffrey michael Posts: 68, Reputation: 6
    Junior Member
    		  
    #2

    Apr 4, 2009, 08:03 AM

    Try starting the computer in safe mode by hitting f8 at start up then see if they work in safe mode. If that don't work you may need to clear you nv ram, this requires you to literlly open the computer so you will need to contact your service center for that. What kind of computer is it I have tech support numbers for most manufact.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #3

    Apr 4, 2009, 12:21 PM

    When PC is starting, get into BIOS and make sure that the BIOS recognizes the USB ports and are enabled
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

USB Ports not detecting anything after. [ 2 Answers ]

My laptop Mecer, Model No. 755S14 has been working well until yesterday when I used someone's memory stick. After removing it all my USB ports can longer detect anything. I cannot even see them in device manager? What could have happened? How do I restore them? Assist? Ona.

My computer usb ports [ 1 Answers ]

Can't get my usb ports to registet.. did a system restore.. I reinstalled everything that I think I need.. problem is I can't get my external hard drives to pickup.im all out of options please sombody help me:confused::confused:

Rdp ports [ 3 Answers ]

Hi, I have a 2 computer coneccet to a di-524 router and want to conect to them with rdp, I open the port 3389 for one of them and wonder how can I configure that the other computer will be configured in the router for rdp, Ex1 192.168.0.10:3389 this the one I configured Ex2 192.168.0.5:3379...

Forward ports [ 1 Answers ]

Hi there I have forwared a port on my router and I now need to forward a port in my firewall program ( zone alarm ) and my virus program ( Avg free adition ) does anyone know how to do this

USB Ports [ 7 Answers ]

I ger error messages when I plug a device into either port on my PC... Do I have to replace it? If so, is it difficult, and about how much should it cost?. I have very little experience with this type of thing. Thanks.

View more questions Search