Search:
Type: Posts; User: pomonabill220
Search:
Search took 0.00 seconds.
-
I am particularly trying to use the remote sensor for outdoor indication. The stat has to be configured for remote sensor "on" so the stat does not use the remotes for control, just indication.
-
Hello TTop...
I bought it (and three others) and a zone controller (Honeywell TZ-4) as a package deal.
The TZ-4 was new and the stats were not.
I was able to get a user/installation manual with...
-
I have upgraded to the Totaline p374-2300sch stats. I have the install/owners manuals for the two 2200's that I am using, but need to know more about the 2300's that I am using.
I know they have...
-
So if two stage valving is used, are the pressures different for each valve? i.e.. Stage 1 valve is set at, say, 2.0" WC and stage 2 is 3.5" WC?
-
Sounds like it is a CRT rear projection TV? The reason you see multiple images in the different colors (blue should be there also), is the convergence has changed.
Possibly the section that drives...
-
Another quickie...
The furnaces that do have multi stages of heat input... how is that accomplished? Is the gas pressure varied? Are the number of burners turned on and off? Is the gas valve...
-
Thanks for the response!
I fully realize that if the heater is NOT designed for anything OTHER than 100kBTU, that all the items you mentioned will be comprimised AND efficiency will suffer.
...
-
Could also be a tree limb that fell into the outside condenser and the fan is hitting it, or a large dried leaf (s), or, God forbid, a little critter that crawled in to keep warm, when the fan was...
-
If is is a sheet metal sound, this is called "oil canning".
Years ago (and still today) there are oil cans made that dispense oil by pressing on the bottom of the can and it makes a kind of...
-
I have a situation where I need to reduce the input to a FAU natural gas heater.
It is rated for 100k BTU input at 3.7" WC.
I read somewhere that a heater rated at 3.5" WC (100%) is reduced to 0.6"...
|