Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Do I connect old, unmarked thermostat wires to new thermostat?
[ 2 Answers ]
Hi folks, I have an old mercury Honeywell thermostat with two unmarked wires sticking out of the wall. They almost look like thin audio cables, with one lighter than the other. I was planning on replacing it with a new Thermostat for the forced hot air gas furnace (which is probably about 10-20...
Need help with old Fedders thermostat wires. The old color wires go to what.
[ 1 Answers ]
Replacing old Fedders with Honeywell thermostat Asked by Amador On Jul 18, 2007 Share this question: I am replacing an old Fedders thermostat with a new Honeywell. The new thermostat ask to identify wires for Rh Rc W why & G My old Fedders has V H C & F Can someone tell me which equates...
How to connect red and white wires to a thermostat with G, why, W, RH and RC wires?
[ 0 Answers ]
I'm trying to change a Honeywell RTH 6400, to a LUX TX 500
Which wires should I use on my new thermostat?
[ 2 Answers ]
I had a Carrier builders non prog thermostat which controls my AC-heat (and air exchange) - The wires hooked in it were white in W, Yellow in Y, Green in G, Red in R and black in C. The orange and blue wires were not used. I purchased a Honeywell RTH4300B. I switch off the main breaker and...
Thermostat Wires - Only 2 Wires (both black)
[ 4 Answers ]
Hi there, I'm switching my thermostat for a newer digital one, though when I took out the old thermostat, there were only 2 black wires with white stripes on them. The new thermostat calls for an RH wire and a W wire, but I have no way of distinguishing the two apart. How can I tell which wire... View more questions Search
|