Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carburetor
[ 1 Answers ]
I have a pz26 carburetor with a port on the choke side of carb just above the mounting end of carb not sure what connects to. PLEASE HELP49139
MTD Carburetor
[ 6 Answers ]
I have a MTD 17.5 HP riding mower. When I start the engine it sound like there is a large amount of gas going to the engine thena small amount. I removed the air filter and gas filled the area where the air filter set. I figure my problem is in the carb. Any suggestions appreciated. Thanks
Carburetor bogs out
[ 4 Answers ]
I have a 72 gmc pickup truck with a 350eng and a edelbrock 1406 4brl carb.the problem I am having is while driving the fuel is getting to the carburetor but after about 20min it starts to cut off then it just cuts off,at first I thought there was air coming into the line from the gas tank to the...
How to adjust carburetor
[ 2 Answers ]
I have a **!#$$* Poulan Prolink PPB 250E string trimmer. Just put a new carb on it, thinking that was my problem. It will now at least crank with the choke on and run pretty well, finally winding up to a fairly high rpm. However, no matter how warmed up it gets, when you turn the "choke" from start...
Carburetor removal
[ 2 Answers ]
I have a Weedeater brand lawnmower and I am trying to remove the carburetor to replace the diaphram, the local shop told me this would work. I have removed the 5 screws around it but is still won't come off. Am I missing something. View more questions Search
|