Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Vapor barrier in Bathroom
[ 7 Answers ]
I am doing a bathroom remodel in my Central PA home. I have heard several different opinions on how to install a vapor barrier. I was told by one person that I should install unfaced insulation on all exterior walls and then install a 4 mil poly vapor barrier. After that, I should install green...
Vapor barrier in ceiling?
[ 2 Answers ]
My Kitchen has an old panel typed ceiling which I really dislike and is starting to show unevenness due to the old glue coming undone. Plan is to just rip it down and replace it with drywall. However I have a question about installing a vapor barrier.. Right now it is just ceiling titles, then...
Vapor barrier behind greenboard.
[ 2 Answers ]
Hello: In doing greenboard sheetrock in a bathroom, I have been told that I should not use a vapor barrier over the insulation for outside walls. If this is correct then why? In addition is any problem expected if regular drywall screws are used instead of stainless Screws? What...
Double vapor barrier
[ 1 Answers ]
Will there be a potential problem using a DOUBLE vapor barrier as in the following setup? Bedrooms were cold/drafty. Removed the drywall on the outer walls, sealed all leaks and put in new insulation. The insulation has the paper vapor barrier attached, installed toward the heated room. As...
Moisture barrier under cement board in shower
[ 3 Answers ]
Hi, I'm framing in a new stall shower, have looked at web sites on the subject and most experts suggest putting a moisture barrier under the cement board. I can see why that would be good. One company, which produces a thick (15 mil) membrane for this application, also shows a detail in which a... View more questions Search
|