Ask Experts Questions for FREE Help !
Ask
    DaveTH's Avatar
    DaveTH Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 3, 2010, 02:11 PM
    I have an 26 yr old Magic Chef attic furnace and I'm trying to find out size.
    What is the size of my old Magic Chef Forced Air furnace Model # EC8A75DC30-10 and can you provide me where I can get data info of this equipment.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 3, 2010, 02:46 PM

    75,000 BTU with a 2 and a 1/2 ton drive for A/C= 30,000 BTU for the A/C.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Magic chef furnace wiring schematic [ 27 Answers ]

I have an old Magic Chef gas furnace in my garage. Gas is connected, but wiring for fan and thermostat are a question. 55K BTU, 12 amp blower. Need to know what wires to connect to thermostat. Also, there are three wires exiting furnace. I know which ones power the 110v blower, but there is a...

Magic chef furnace models [ 0 Answers ]

I have a Magic Chef LP gas furnace (Model EG6E100DC-1). Last week the heat wasn't kicking on in the morning and found that the draft inducer blower had cooked a bearing. I shut down power to the unit, removed the blower, sourced a new blower, installed exactly as I had removed it. The draft inducer...

Main burner of Magic Chef Ultra II furnace will not light [ 0 Answers ]

The main burner of my Magic Chef Ultra II furnace will not light normally. The furnace has an electronic ignition. Its blower, electronic igniter and pilot burner seem to be functioning normally, but the main burner won't fire up unless I blow on the pilot flame several times. When I do blow on the...

Magic Chef Ulta 97 Furnace [ 1 Answers ]

I have an Ultra 97 gas fired heater made by Magic Chef. I assume its about 15-18 years old. When the heater kicks on, the only thing that happens is that the blower starts running but the ignitor does not ignite. There are 2 flat cylinder type switches when you open up the door. If you tap on...

View more questions Search