Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installation of a shower stall on a concrete slab
[ 6 Answers ]
How is the drain of a shower stall connected to the ptrap that has been roughed in, in a concrete slab during new house construction to make a water tight connection? The ptrap is PVC.
Shower stall installation help
[ 1 Answers ]
I have recently begun pulling up my old and cracked slab in the basement and I am repouring the concrete a section at a time. I have started at the front of the house and I will work my way back in 8 foot increments until I have reached the back wall. Following this, I will install a platform for...
Turning walking shower stall into bathtub/shower combo.
[ 4 Answers ]
Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line...
Help with shower stall installation
[ 1 Answers ]
Hello. I am going to change out my shower stall and my house is pretty old. I just need to know the basics on how to install the shower pan and is there anything that I should be made aware of before I tear out the old pan?
Tub/Shower Stall Installation
[ 2 Answers ]
For new construction, should the plumbing for spigut, faucet handle, and shower head be installed before placing the tub/shower stall in place or after? Or doesn't it matter? Thanks View more questions Search
|