Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing bedroom hollow doors with 6 panel pine doors.
[ 4 Answers ]
I am replacing my bedroom hollow doors with 6 panel pine doors. My problem is that the 6 panel pine doors are not fitting properly. When I hung one door with the same size hinges I was able to put the screws in the same holes as the old ones but the door will not close. The new door is about...
Taping drywall
[ 3 Answers ]
I bought self-adhesive tape for the drywall I pt up and I was wondering, since the tape is self-adhesive, if I needed to put a layer of joint compound under the tape or if it was OK to place the tape directly on the wall?
Drywall taping and mudding
[ 6 Answers ]
My contractor hung the drywall leaving wide gaps between sheets, some I'll have to replace but can I tape and mud gaps that are 1/4" or less than 1/2" without it cracking later? This is in 2 room. Thank you.
Taping cement board joints
[ 6 Answers ]
Does anyone know what kind of compound to use on cement board?I've checked the USG FAQ site and they recommend 'glass tape for the joints, I see no mention of compound, other than to say that joint compound is not acceptable because cb is generally used in damp areas and the joint compound won't... View more questions Search
|