replacing bathtub caulk with sealer trim -- does it work well?

tuner · #1 Sep 6, 2009, 11:24 AM

Hello all,

I am a novice at this kind of thing -- I have an old bathtub that needs the caulk replaced and my last attempt at that was dreadful. Do those sealer trims work very well? This is only temporary until next year, when I hope to have the entire bathroom remodeled. Thanks. Tuner

KeepItSimpleStupid · Sep 6, 2009, 01:11 PM

No, the adhesive is horrible.

What kind of problems were you having?

Wrong caulk?

Problems smoothing?

Problems cleaning up?

What exactly did you use and what happened?

tuner · Sep 6, 2009, 05:26 PM

I tried using silicone type caulk and was very clumsy and was not able to get it smooth. It was rough and bumpy, didn't seal well, I think, and now looks groady again. I was going to try the other kind of seal, and was hoping it might work. Tuner

KeepItSimpleStupid · Sep 6, 2009, 05:45 PM

Thought so. Wrong product. Use this: DAP Products - Caulks and Sealants - DAP® KWIK SEAL® Tub & Tile Adhesive Caulk

There is also a spray that you can use to smooth out the applied caulk and get a nice finish. Use a pair of disposable vinyl gloves.

Now the hardest part will be removing the old caulk.

tuner · Sep 7, 2009, 07:53 AM

Okay, thanks from both of you. I will try that.

KeepItSimpleStupid · Sep 7, 2009, 08:22 AM

Here is the smoothing stuff: Caulk Easier Faster Better with Caulk-Mate by CSS Global

Cachin · Sep 28, 2009, 08:18 PM

I think sealer trim can slove your problem.
Sealer Trim is a flexible plastic trim with adhesive backing that creates a water-tight seal for the gaps between your bathtub and the adjacent wall; works as a substitute for traditional caulking.
It's mildew-resistant and will not crack or discolor.
Simply peel and press in place no tools or messy clean up.
We are professional manufacturer and supplier of sealer trim of bathroom & kitchen from China.
Please feel free to contact me if you have any questions.

KeepItSimpleStupid · Sep 28, 2009, 09:17 PM

I used some of it, but the tub is flat and the tiles have a pattern etched in it. It used a butyl rubber adhesive that will not stick.

I did have a chat with the manufacturer because I wanted it without the adhesive which I cannot get.

I did develop a method to remove the adhesive which I plan to do. The Kwick seal adhesive works very nicely. I've glues a few sections around a soap dish and they look nice.

The method is a little time-consuming, but ti works.

I also want to find some liquid fungicide which I haven't been able to find. That's what I used on caulk I applied 30 years ago and had ZERO problems with mold.

Any help in that area will be appreciated.