Ask Experts Questions for FREE Help !
Ask
    coach78's Avatar
    coach78 Posts: 45, Reputation: 1
    Junior Member
    		  
    #1

    Aug 4, 2007, 05:07 PM
    Removing primer
    I'm stripping a solid wood door. All of the paint is off now I'm working on the primer to get down to the wood finish. Is sanding my best/only option?
    natetheskate's Avatar
    natetheskate Posts: 56, Reputation: 0
    Junior Member
    		  
    #2

    Aug 4, 2007, 06:58 PM
    It is my opinion that unless you plan to repaint your door you do not need to remove the primer just paint over it, if it is your intention to stain or veneer the door it would be best to strip the paint so not to ruin the woods natural beauty.
    glavine's Avatar
    glavine Posts: 895, Reputation: 87
    Senior Member
    		  
    #3

    Aug 5, 2007, 05:03 AM
    Id Agree You'll Need To Get A Paint Stripper. Ive Use The Kind That Comes In A Gel, I Really Worked We For Me,
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Primer and Paint [ 3 Answers ]

I have put primer over a black wall and want to paint it orange. The problem is I put 4 coats of paint and it's not covering.I have A thick expensive paint and don't understand.I was told to put More coats until it's covered.Is this what I should do?

Using painters tape & primer [ 1 Answers ]

I want to paint the wall surrounding our fireplace. Let me explain my situation;All four walls will be painted a light yellow, the forth wall around a dark manteled fireplace is where I want to paint color blocks using three shades of blue, light, medium and dark. In between the blocks will be...

Primer button on weedeater [ 2 Answers ]

I have a POULAN WEEDEATER model # FL20,and when I push the primer button down it won't spring back and,no fuel comes through the fuel line!? :(

Trap primer [ 1 Answers ]

Why do I need a trap primer for a drain?

Primer bulb for push mower [ 3 Answers ]

I have a push mower that only stays running when the primer bulb is pushed in. When I let go of the bulb, it quits running. Does this mean there is a hole in the primer bulb. When I hold the primer bulb in it runs like it would normally. Any suggestions?? :confused:

View more questions Search