Ask Experts Questions for FREE Help !
Ask
    patsy17139's Avatar
    patsy17139 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 26, 2009, 03:31 PM
    Removing ceramic tile shower with cement board
    I am trying to demolish my master bathroom shower. It has ceramic tile over cement board which is screwed to the studs. Other than brute force (which is getting me nowhere fast) is there another way to remove the shower?
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    Sep 26, 2009, 03:59 PM

    I think that brute force is the only reasonable solution. Good luck.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Sep 26, 2009, 05:17 PM

    I agree. If you can get the tile off, you may be able to find the screws and take them out, making the removal of cement board a little easier, but I would just go in there and start breaking the hole thing up with a hammer(even a sledge). It makes for one heck of a cleanup job, but takes much less time than trying to find the screws under morter. Just demolish the thing,, that's why its called demolition.

    Get a few buddys over(entice them with the prospect of beer) and let them have at it.

    Do be careful however,, tile is very sharp once broken. Wear safety goggles, good gloves, and just use some common sense. You are basically going to have a bunch of broken glass to clean up afterwards.
    patsy17139's Avatar
    patsy17139 Posts: 2, Reputation: 1
    New Member
     
    #4

    Sep 27, 2009, 12:24 PM
    Thanks, that's what I thought but it was worth a shot. I bought a bigger wrecking bar with a claw hammer on one end. Weighs less than a sledge hammer but works just as well and the other end can be used as a pry bar. Even with that it will be a long process. I am wearing a mask, goggles, hair covering, a shirt that covers my arms and gloves.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #5

    Sep 27, 2009, 01:26 PM

    Good luck on your project and please keep us posted.

Not your question? Ask your question View similar questions

 

Add your answer here.


Check out some similar questions!

Removing Concrete from ceramic tile [ 4 Answers ]

Does anyone have ideas about removing concrete mud from the back of ceramic tile. I have 50ish flamingo pink tile in my bathroom. I recently removed all the tile from 1 wall and managed to save enough of the tiles to fill in the area that was left open when the vanity was removed. Some of the...

Installing ceramic tile on cement floor [ 6 Answers ]

Hello, We are redoing our basement bathroom floor (cement) and installing new ceramic tiles. Our question is can we lay the tile directly on the cement floor? The floor is level and clean but the old one was cold. Thanks!

Removing ceramic tile from a table [ 2 Answers ]

I bought a table with ceramic tile at a garage sale and want to redo the tile. What is the best way to remove the old tile?

Can I Paint Cement Board Now, and Tile Later? [ 2 Answers ]

I am finishing a new shower, I used a pre-fab shower enclosure set and would like to tile the walls and ceiling over the shower in the long run. For now though, I'd like to wrap it up. I know I can prime and paint the backerboard but I don't know if this makes it unsuitable for tiling over later....

Removing Ceramic Tile [ 4 Answers ]

I need to remove a Ceramic tile floor that is in thin set Mortar. The problem is that the tile has a clay type bottom and the tile Is coming up in very small pieces. Any thoughts? I am thinking about Purchasing a demolition hammer. Not sure if that would help. Thanks For any replies


View more questions Search