Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Interior Home Improvement   »   My concrete won't dry.

 
Thread Tools Display Modes
Question
 
 
#1  
Old May 5, 2008, 11:15 AM
DJschultz
New Member
DJschultz is offline
 
Join Date: May 2008
Posts: 2
DJschultz See this member's comment history on his/her Profile page.
My concrete won't dry.

I did some plumbing in my basement by jack hammering up the floor to install a drain for the shower and sink.

I back filled the trench partially with gravel and poured new concrete. The trench was 15" wide by 4" deep and about eight feet in length. It's been 3 weeks now and the concrete won't dry.

Any suggestions? Does anyone know what to do and why it won't dry?

Reply With Quote
 
     

Answers
 
 
Old May 5, 2008, 11:20 AM   #2  
Ultra Member
Tuscany is offline
 
Tuscany's Avatar
 
Join Date: Sep 2006
Location: Hugging my teddy bear
Posts: 1,028
Tuscany See this member's comment history on his/her Profile page.Tuscany See this member's comment history on his/her Profile page.Tuscany See this member's comment history on his/her Profile page.
First off concrete does not dry- it cures.

second if after 3 weeks it is still not dry then it was not done correctly. You might have needed more cement (glue that holds the concrete together). It sounds like your mixture was to wet to begin with.
  Reply With Quote
 
     
 
 
Old May 5, 2008, 11:30 AM   #3  
New Member
DJschultz is offline
 
Join Date: May 2008
Posts: 2
DJschultz See this member's comment history on his/her Profile page.
Thanks for the lesson. I used Quickcrete ready to use concrete mix and I thought I was VERY conservative on how much water that I used.

Do you have a suggestion on what I should have used that provides the cement that you indicated in your response?
  Reply With Quote
 
     
 
 
Old May 14, 2008, 03:34 PM   #4  
New Member
shager36 is offline
 
Join Date: May 2008
Posts: 1
shager36 See this member's comment history on his/her Profile page.
Hi,
I'm not an expert on cement or concrete or anything really, but I had a similar problem with some quickcrete concrete mix. I had two bags and one cured fine the other was still wet a week later. I removed the wet and tried another bag, mixed it the same as before and it was good in a few hours. Possible you got a bad batch??? Missing something? I'm not sure. Just a thought
  Reply With Quote
 
     
 
 
Old May 14, 2008, 06:38 PM   #5  
Senior Member
smearcase is offline
 
Join Date: Oct 2007
Posts: 644
smearcase See this member's comment history on his/her Profile page.
I have been involved with many thousands of tons of concrete building bridges, roads, sidewalks, light pole foundations, etc etc. I have never heard of concrete not setting after 3 weeks or anything like that. Contractors sometimes have retarders added which delays the chemical reaction, giving them more time to work on bigger pours. Even with way too much water it will usually set within a matter of hours, definitely not weeks. They either left out most of the cement or mistakenly put a chemical retarder into the quickcrete. It is said that adding sugar to fresh concrete will delay set but I've never tried it, and it would be sabotage in your case. Concrete even sets under water.
  Reply With Quote
 
     
 
 
Old May 15, 2008, 11:32 AM   #6  
Home Repair & Remodeling Expert
ballengerb1 is offline
 
Join Date: Dec 2006
Location: Wheaton, Illinois, USA
Posts: 10,167
ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.ballengerb1 See this member's comment history on his/her Profile page.
Try contacting Quikcrete directly and ask them whats wrong? They may replace the product free of charge because I think you'll be digging it out. QUIKRETE® - Contact Us
  Reply With Quote
 
     

Bookmarks


Thread Tools
Display Modes

 
Similar Sponsors

Similar Threads
Question Asker Forum Answers Last Post
Concrete Stain on EXISTING concrete harco1011 Exterior Home Improvement 3 Dec 12, 2007 07:52 AM
Pouring Concrete Slap over Concrete piers ronnyballgame Construction 1 Sep 13, 2007 09:49 PM
hang concrete plaque on concrete wall lbowman Exterior Home Improvement 6 Sep 8, 2007 08:53 PM
Pouring interior concrete slab over existing, cracked concrete slab ikaboo21 Construction 4 Aug 22, 2007 12:30 AM
To concrete or not to concrete icandoit Interior Home Improvement 8 Nov 7, 2005 01:53 AM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 04:14 AM.