Ask Experts Questions for FREE Help !
Ask
    butchl's Avatar
    butchl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 20, 2007, 09:55 AM
    How do I remove a one piece bathtub/surround
    How do I remove a one piece bathtub/surround
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Dec 20, 2007, 10:23 AM
    I am assuming you are doing this to replace it and not for some repair. I use a reciprocating saw, mask and goggles. The surrounds are usually more than one piece and you can wedge a prybar into the seam to get started. To be safe shut off your water and all electric circuits but the one you need for the saw, I run a 25 ' extension cords so I'm drawing power from somewhere other than the bathroom. Chop it up into 2x2 pieces so you can remove easily.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove a foot lock bathtub drain stopper? [ 1 Answers ]

Hello, Can anyone tell me how to remove a foot lock drain stopper please. It is the kind that is pushed to engage and disengage it. Thanks, Kim

Trying to find a one piece tub surround to fit a large jet tub [ 1 Answers ]

I recently purchased a home with a large juccuzzi jet tub (measures 73" long, 36" deep, and I can go as high as 78" to my ceiling) . I would like to put in a new tub surround, however, I have talked with rona, home depot, and many renovators in my area and they all are telling me that I can not...

Preparation to install a 5 piece tub surround [ 1 Answers ]

What is the best way to intall a tub surround? The green board is already up and primer. There are no instruction to be found. What preparations do I have to do first? Do I have to use mineral sprits on the backing before I apply the adhesive?

Tiling a bathtub surround - new backerboard? [ 2 Answers ]

I have a bathtub surround done in tongue & groove wood planks glued and nailed directly onto sheetrock, in turn nailed to the framing. It is quite old and predictably, the wood has rotted and caused the sheetrock to erode. (see photo) I would like to remove the wood and tile the surround. Do I need...

How do I remove an old bathtub spout? [ 1 Answers ]

I want to replace the bathtub spout with a new one available at hardware store. I tried unscrewing the old spout barehanded and it won't budge. Can I use a wrench (I don't care if the old spout is marred), or is there a danger of breaking the pipe in the wall. I do NOT have access to the...

View more questions Search