Ask Experts Questions for FREE Help !
Ask
    mizlady1255's Avatar
    mizlady1255 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2007, 02:25 PM
    Hardwood floor scratches
    A friend helping(yeah right) me move my sofa,slided the sofa across my hardwood floor.Now we have large light streakes on the dark wood.Not deep to touch,just light enough to see soon as soon as I walk in room. What can I do? Short of redoing the whole room.This is a large room and the scratches are in the middle of the room.
    glavine's Avatar
    glavine Posts: 895, Reputation: 87
    Senior Member
    		  
    #2

    Jun 22, 2007, 03:37 PM
    You can try and put a polish on the floor. That will help hide it,
    Or you can tape off the pieces of wood and apply a spray coat of clear polyurathane on just the affected pieces
    Or they make some colored markers for stained floors you can rub over the scratch, they come in a lot of colors to match your floor.

    If the scratch is white, it's the clear coat that is showing the scratch, polishing or waxing will help, id try this first before the other to
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Glue on hardwood floor [ 5 Answers ]

Just ripped up the carpet and found maple hardwood floors underneath, on one part there is a stretch where it was glued. Does anyone the best producted to use to remove it? Or is sanding my only option? Thanks.

Glue removal.hardwood floor [ 7 Answers ]

Any special solvents to remove flooring glue from hardwood flooring... or home remedies?

Hardwood floor [ 1 Answers ]

I'm taking up carpet form old hardwood floor and going to put new hardwood floor next to the old, there is about 1/2 inch difference in height what kind of transition do I need between the old and new.

Filling holes in hardwood floor [ 2 Answers ]

I'm patching the areas where old floor heater vents used to be. 1) Any good tips for getting tongue & groove boards into the gaps between existing boards that I haven't chiselled out? 2) Should I stain the new unfinished boards before or after putting them in the patch? 3) Should I put...

View more questions Search