Ask Experts Questions for FREE Help !
Ask
    bobckjr's Avatar
    bobckjr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 26, 2007, 02:40 PM
    Angle stop valve
    Do you have any idea on how to install a stop valve under a bathroom sink?

    Thanks R. Koehn
    wags's Avatar
    wags Posts: 80, Reputation: 4
    Junior Member
    		  
    #2

    Jul 26, 2007, 10:09 PM
    Do you have copper that needs to be installed using a compression fitting, or galvanized pipe that is threaded? Turn the water off at the main, remove the fitting going to the faucet and install the valve, then reconnect the faucet. Take a picture and go your local hardware store, they can help you get what you need.
    Good Luck!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Aug 5, 2007, 06:42 PM
    If You Have Cpvc Pipes , Purchase A Male Adapter, And Glue It Onto The End Of The Pipe, Then Insert The Riser Tube Through The Nut And Ferrell And Tighten. Then Turn The Water Back On.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #4

    Aug 5, 2007, 07:02 PM
    What kind of pipe are you putting the new valve on, copper plastic or iron pipe?
    Let us know.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plastic angle valve on copper - What is it? [ 6 Answers ]

In my bathroom the copper stub out is connected to a plastic fitting which has a braided supply line fixed to it. Where the shut-off knob would normally be there is a circular piece of plastic which turns freely. Is this some type of quick connect fitting? I think I have a leak at the...

Replacing hot water angle stop to shut off valve [ 5 Answers ]

My angle stop seems to be soldered to copper piping. How do I change it to keep the hot water shut oof valve from leaking water when turned off?

Faucet still drips with angle valve closed [ 1 Answers ]

:( Bathroom faucet continues to drip even after shutting off angle valve under sink. Does this mean I need to replace the angle valve?

Angle stop valve leaking [ 13 Answers ]

My cold water supply line going to my faucet burst so luckily I was there before it got bad and also the valve still works. After replacing the hose I noticed the hot water valve was corroded and was seeping water. So I thought it would be a great idea to replace all the valves and hoses in both...

Angle stop [ 3 Answers ]

What is a standard 1/2" compression angle stop? I am installing a sink faucet supply line

View more questions Search