Ask Experts Questions for FREE Help !
Ask
    baracuda67's Avatar
    baracuda67 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2012, 11:24 PM
    Programming a DSC PC1832 to call Cell Number
    I'll throw a question out there!

    I installed a DSC 1832 system myself, and everything works fine... except for programming the system to call my mobile phone when the alarm goes active? I have two keypads, (RFK 5501 & 5500 ). So far I've programmed:

    (301) with my mobile #
    (350) with (06) for residential dial
    (380) 1 enabled

    I've run out of ideas... and seeking help..

Check out some similar questions!

Programming DSC PC1832 alarm [ 3 Answers ]

HI... How do I change the delay time on a DSC PC1832 STAY-ARM key to 30 seconds delay. Thanks

DSC pc1832 installation/programming [ 1 Answers ]

I'm installing the DSC1832 in my home. Here's how I wired: 1) Zone1= upstairs motion (4wire) red to Aux , blk to Aux-, yellow to Z1, Green to Com. 2) Zone2= downstairs motion (4wire) " " " " " " Z2 " " " 3) Zone3= upstairs smoke (4wire) red to Aux , blk to Aux-,...

Programming a DSC PC1832 [ 6 Answers ]

Hello, I'm installing and programming a basic home security system. I'm using a DSC PC1832 control panel. I have 2 keypads and a number of devices (door and window contacts, pir's, smoke and heat detectors). The home is divided into 2 suites (owner's and tenant's) and I've partitioned the...

Programming manual dsc pc1832 [ 2 Answers ]

I am looking for a programming manual for a dsc pc1832. Could anyone point me in the right direction. Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.