I have an ADT Focus 32 home security system. When the system was installed, the installer programmed a different chime sound for each of 4 exterior doors.
I would like to change the chime tone on one of the doors, I have the "Instruction Manual" and the "Installation Manual" but neither provide information on how to select a different chime for a particular zone. I have a Master code for the system, so I think I should be able to do it if I knew which option or programming section to use.
What would be very useful would be a chart of all the programming sections and what the options are for each one.
Although this is an ADT branded system, I believe it is manufactured by DSC and should use the same programming codes.