Ask Experts Questions for FREE Help !
Ask
    amady55's Avatar
    amady55 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 4, 2011, 10:52 PM
    Disable error (3) from DSC PC 1832 alarm system
    I have DSC PC1832 and I'm not going to use the telephone line how can I disable the phone line
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Sep 6, 2011, 02:34 PM
    You need to Disable Communications, and also Telephone line monitor, The PC5010 is the previous version to the 1832. The Locations for that was I believe 380 and 015, then check or uncheck the appropriate box.
    You probably have the manual as you have the Installers Code?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing the phone number programmed into a DSC 1832 alarm [ 12 Answers ]

I have a DSC 1832 alarm with a 5500 keypad. This is connected to my home phone to make an outgoing call to my and my wife's cell phone if the alarm is triggered. This has worked for the last 2 years but the phone company changed my cell phone number. The company that installed the alarm is no...

Dsc alarm 1832 connection to control 4 home automation4 [ 2 Answers ]

What do I need to connect a DSC 1832 control panel to Control home automation system?

Working on a dsc 1832 system for 2 days now and keep getting a keybus fault error! [ 2 Answers ]

Hi, I have been working on a dsc 1832 system for 2 days now. I can see all 5 key pads, 3 expanders and the power supply in section 903 but still I am getting a keybus fault reading on my keypads and once that happens I am unable to use any of the keypads. What do I do?

Changing installer code on a dsc 1832 alarm system [ 2 Answers ]

How do you change the installer code on a DSC 1832 alarm

Connecting DSC power 1832 alarm to phone line [ 4 Answers ]

Hello - I have a DSC power series 1832 alarm system that I want to connect to a central monitoring station. I have connected it to the phne line via a RJ31X telephone jack and cord set. I set up the system to monitor the phone line such that it should report an error when the phone line is no...


View more questions Search