I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...

Hello, I just purchased a new pull chain switch for my ceiling fan light. The lead wires coming down are white and blue. The wires on the new switch are black, blue and red. Normally these are simple installs but I need help on how to wire these due to the different colors. Thanks!

Pull chain on the ceiling fan light broke off, so I pulled it down, and figured out what to buy, but at some point one of the two black wires going to it came loose, presumably out of a screw cap. Does it just go in the cap with the other black load wires (3 still together)? Do I understand...

Hello all I need to replace the pull switch for the light for my ceiling fan. I have the part and took off the the cover to get at the part that holds the bulb where the wires are supposed to connect. The problem is that one of the old wires is no longer connected and I can't tell where I should...

I just replaced the broken pull chain switch on a ceiling fan. There were two black wires coming from above the light socket. Either way I attached them to the two black wires coming from the pull switch worked. Does it matter which goes to which if they work either way?