Ask Experts Questions for FREE Help !
Ask
    indianpsychology's Avatar
    indianpsychology Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2007, 01:52 AM
    No picture but sound coming on TV
    My Onida Tv is 4 months old
    All of a sudden it went black but the sound was coming
    Tried turning it off and on for a few days but was unable to get any picture. Finally took it to the service center since there is no home service in Saudi Arabia.
    He turns it on He does nothing and it comes.
    So he says everything is fine. I come back home plug in the set and experience the same problem only sound can't see any display no menu option volume movement.
    Tried the set in various plug points since here we have both 110 and 220 v
    Finally in one socket I got the blue back but for half a min
    Then tried the next day again same thing tried to plug in receiver again it went black. Static is there sound there remote works also
    Finally yesterday I got the blue back plugged in receiver haven’t budged the TV or turned off the power switch. Too afraid to thinking the TV will go off.
    What could be the problem?
    The service center is too far off and then the set has to be carried up three flights of steps any suggestions. Please help with your ideas.
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
    		  
    #2

    Mar 21, 2007, 05:45 PM
    Can you tell us what is your video source; antenna, or a cable signal? Also can you test your TV with some type of alternative signal like a DVD or VHS tape and see if you get a picture with this method. Possible that you have a loose connection in the video circuit which got moved to work when you went to the repair center.

    Good Luck,
    Morrowrj
    Lowtax4eva's Avatar
    Lowtax4eva Posts: 2,467, Reputation: 190
    Ultra Member
    		  
    #3

    Mar 21, 2007, 07:32 PM
    Yes, it could be a problem with the source, are you trying to watch TV through a cable box etc? Try just plugging in something simple like a vhs, or plug the television co-axial cable directly into the TV. Try various channels, if it has video input make sure its on the right video input.

    The moving it back and forth from the repair centre the first time might have shook a connection back into place, if none of this works you might have to go back to the repair shop. There is very little an average homeowner can do to repair electronics.
    Meazy's Avatar
    Meazy Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Nov 15, 2012, 11:07 AM
    I have an analog TV converter box. It has worked well until yesterday when I turned on the TV and all I had was audio and no picture. I can get into the TV guide and set up info, but to television show pictures. What do you suggest?
    Email: [email protected]
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mitsubishi VS60603 sound, PIP, no picture [ 4 Answers ]

Hello, I have this TV which is about 7 years old. Recently, the picture no longer works (screen is blue). I tried a couple of hard resets but still the same issue. The sound, PIP, and the menu screen are fine, but if I leave it on for say 5 minutes, it shuts itself off as well. This all happened...

CPU fan starts, a low hum sound on speaker and a vroom sound from cpu/fan [ 5 Answers ]

I just bought a new pentium 4 3.0 Ghz motherboard with 256 ram, connected everything as directed on the manual and plugged the power connector then started the computer. The fan starts then nothing else. All I hear is a very low hum/beep sound from the computer speaker which is immediately...

TV only thin line for picture, has sound [ 2 Answers ]

My Panasonic TV screen only shows a thin line through the middle of the screen. I can hear the sound and the line that's there changes color, etc if I change channels, to match what would be on that channel. What causes this and is it worth fixing? Or should I just look for a new TV?

No sound, asus mother board built in sound card [ 16 Answers ]

My comp plays no sounds. All drivers are installed and I have re installed them 2. Its well annoyin. Any help with this would be great. Thanks

NO SOUND after sound card install [ 3 Answers ]

Hey I'm new on here I have a HP tower.. just installed a beefed up sound card in it and it doesn't work.. made sure all connection are good.. and installed the program.. now it won't work at all.. please help me someone?

View more questions Search