Ask Experts Questions for FREE Help !
Ask
    spinnerrus's Avatar
    spinnerrus Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2010, 07:00 AM
    How can I go aroung the ignition to test 4 bad wire
    I need to know what wiries to jump in order to make mag//coil hot at all time. I'm trying to figure out why I lost spark. I already changed the plug once. Please help! thanks
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 2, 2010, 04:53 AM

    You should have 12 volts to coil when key is turned on, in a points setup, when the points open up, capacitor discharges and coil fires.
    What is your Primary and Secondary Coil Resistance?
    4 Bad Coil wires and you changed the Plug once? Do you mean Plugs, or does this plug have 4 wires?
    Edit, I just noticed you are using the Number 4 for the word "for"? Disreguard anything I said on this and your other post concerning 4 wires.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I go aroung the ignition to test 4 bad wire [ 1 Answers ]

How can I bypass everything in order to test to make sure the coil is getting juicem? Thanks for any/all help.

Ignition Module test [ 2 Answers ]

Hi guys Furnace : whisperheat with ignition box close and open The furnace carries ignition model and spark sensor pilot. On G/V you can see mp mp/mv mv which are all connected to the igniton module and grnd connected to the furnace . Now the problem : When you call for heat ,the...

Bad Universal Ignition Module? [ 3 Answers ]

Hello, I had someone look at my handler and they said the circuit board went bad. He rigged one of the wires so that the fan would run and this would let the A/C come on. (I am in Florida) I called a company that worked on my friends unit and he instructed me to buy the WR 50A65-853 Model, but I...

View more questions Search