 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Why does my oil filled baseboard heater make clanging and banging noise
My cadet baseboard heater has begun to make a loud clanging/grinding noise upon startup. It gradually subsides to a gurgling and then quiet until the thermostat kicks it on again. It sounds like metal on metal, like a fan blade coming into contact with metal. Thanks in advance!
I have a 4 zone hot water baseboard heating system. When the thermostat setting is satisfied, the zone valves close with an extremely loud banging. The Valves are 3/4 inch copper, Honeywell #40004850-001. The heating system is 4 years old and this problem started about 2 years ago and seems to get...
Hello All, For starters I've searched this topic and haven't found anything that can apply to my situation. To set this up. We have a boiler/baseboard heating system that makes loud banging noises when it cycles off, on the first and second floor zones. When heating up it makes a creaking...
Every time my base board heating system starts up the baseboard in our master bedroom bangs for awhile. Loud single bang about every 20 seconds for several minutes then it will start. Recently we had pressure relief valve on furnace replaced as it was leaking. Noticed today that it is leaking...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
