cleaning commercial post remodel pricing

Hi trs,

Get the total sq ft.

Ask for specifications. If not go over every thing that they want done and take copious notes.

What sort of flooring; carpet, VCT or other hard floor/s?

Will there be any large items that you have to dispose of: you will need a dumpster.

Is there any high work: ceiling piping, vents, ceiling cleaning, etc?

What is the timeline to finish?

Is there more than one area and is the cleaning to be done progressive? If so, then after each section is completed have the owner or job sup walk the areas with you and have him/her sign off that the area is cleaned to their satisfaction.

After you get back with this info I will be able to help you in the pricing, although I may have a question or two more.

Stringer

----------
------------

HI Tsr,

I am a bit busy presently however I will get back to you later this afternoon.

Stringer

I do not know where you are located and pricing varies for many reasons such as union or non union, other labor costs, how much profit you want, etc. And pricing is always your personal decision in the end of course.

However I offer this; based upon the info you have provided above I would figure labor at 300 to 400 square feet per hour for the general cleaning, then 'time in' the other items such as walls, vents, piping, etc. This will give you a guide as to how many people you will need. If you are going to perform labor yourself it will save labor costs. The first couple years I was out on as many jobs as I could fins the time to. Many times I didn't sleep for days on end.

Figure a total of all your labor costs, insurance, taxes, equipment, supplies, admin, desired/competitive profit, etc.

Add up all these costs and divide it by how many total man hours, this will give you a 'loaded' hourly rate which in my opinion should be somewhere around $18 to $20 / hour. (Only a guess as I don't know your needs/costs) This is contingent upon your costs for example; are you going to need a scissor lift to do the high work? Additional cost for sure. Figure ALL your costs into one lump sum add a percentage of profit.

Is this building new? If so, are you to do inside and out of the windows? Are there stickers on these windows, takes more time.... Things like this have to be considered when pricing.

This way you will have the leaded hourly rate to check your progression and a total price which is probably what the GC or owner wants.

Be sure to get a walk through when you finish and a 'sign off' that your work is complete and satisfactory.

I hope this helps some, any questions? Ask away....

Stringer