Ask Experts Questions for FREE Help !
Ask
    eaglestar's Avatar
    eaglestar Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 16, 2010, 05:49 PM
    Wiring info for Trane XL1200 condenser
    I'm trying to find a wiring diagram for my Trane XL1200 condenser unit. Too many wires with too many components to play guessing games. The compressor stopped running some time this morning. The fan runs just fine and nothing hums otherwise.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jul 16, 2010, 09:07 PM

    There is a wiring diagram on the inside of the units service panel. They all come with one somewhere on or in the unit.
    eaglestar's Avatar
    eaglestar Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 17, 2010, 01:36 PM

    Thanks. By the time I read this, I had found the service folder and the wiring label. Don't know how I missed them before -- must be the heat <G>.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jul 17, 2010, 04:27 PM
    Quote Originally Posted by eaglestar View Post
    Thanks. By the time I read this, I had found the service folder and the wiring label. Don't know how I missed them before -- must be the heat <G>.
    The heat will do that to you. I hope you get your unit up and running.
    Miguel Nieves's Avatar
    Miguel Nieves Posts: 3, Reputation: 1
    New Member
     
    #5

    May 27, 2012, 08:13 PM
    Don't have the diagram inside the unit

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane A/C condenser fan [ 4 Answers ]

I am working on a Trane 4 ton condenser. I need to know if the fan should be turning clockwise or counterclockwise. The rotation arrrow on the label shows clockwise, but when turning clockwise the fan is not blowing out the top. Instead it is pulling air in. Can I change the rotation of the fan?...

Booster fan for a trane xl1200 [ 7 Answers ]

I added a new room on my home and am adding a 3 amp booster fan to my a/c unit that will turn on and off with the blower fan on the main unit. I can pick up a relay to be used to switch it on and off but my question is what would be the best place at the a/c unit to power on the relay from? The...

Trane XL1200 Air doesn't work And wife pregnant [ 1 Answers ]

I'm having a problem with my Trane XL1200 Impack unit blowing the 3 amp fuse I wired it last fall and didn't do something right, heat works fine, but air does not. I'm sure it has to do with the reversing valve, but I'm not very hvac savy. Got to pregnant wife do this week Help Unit was built...

Trane XL1200 Control [ 4 Answers ]

My Trane XL1200 continually shuts down with an error code that says "Replace Control." I jumpered around the thermostat to eliminate that and problem prevails. Does Trane mean replace the control board? I can't find a CNT1669 anywhere if this is the problem.

Trane air handle variable speed motor xl1200 [ 3 Answers ]

The fan hasitates to star It tries to move and the after a minute it will run. I try to set the dip swithches for no delay after running but no imprument, The problem with this is that the coil inside gets frozen since no air is circulating, I caom with a temporary solution a delay circuit on...


View more questions Search