Ask Experts Questions for FREE Help !
Ask
    mdec950's Avatar
    mdec950 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2011, 07:57 PM
    Need wiring for Honeywell RTH2410 wired to Suburban sf-30 furnace
    There was no thermostat on the wall so I have nothing to look at to wire to on this one.

    I have the RTH2410 with Y R G W on the back of it.

    I have a sf-30 Suburban LP Furnace "only" no a/c cooling needed on this install.
    Out of the SF-30 I have yellow = 12v (-) DC
    red = 12v (+) DC
    blue = to go to thermostat
    blue = to go to thermostat

    Where do I wire up this " Honeywell RTH214 to work with my sf-30 Furnace ?

    see figure 6 on page 9 of this link for the wiring for the sf-30
    http://manuals.heartlandowners.org/Heating-Cooling/Furnace/Suburban/SF-20-25-30-35-42_Furnace_Suburban.pdf

    Thanks MARK [email protected]

Check out some similar questions!

I have a honeywell programmable thermostat RTH2410. [ 1 Answers ]

When I installed the thermostats originally I blew the fuses on the boards because I hadn't shut the power off before replacing the thermostat. I got it running with the AC and it ran all summer with no problem. When the weather cooled down we shut off the units for a few days. When we went to...

Furnace probs wiring Honeywell 2310 thermostat to old system: 2 wire issue? [ 0 Answers ]

I have a oil heat only system with two wires- one green one white. After hooking up the White to the 'w' and the green to the 'g', and setting the programs, I woke this morning to a really cold house. I tried resetting the thermostat by removing the batteries, but even after overriding the program...

Trane Weathertron (Baystat 339) to Honeywell RTH2410 [ 2 Answers ]

I just replaced my old Trane Weathertron (Baystat 339) mercury thermostat with a Honeywell RTH2410. Everything appears to be working fine, but I'm concerned about a few things... I had to tape off the Blue and Tan wires because there was no connections available on the new Honeywell. Also, the...

Wiring Thermostat Honeywell 8320U to Furnace-heat pump Trane XE78+XE1000 Combo [ 4 Answers ]

Hello, I have the following systems, each set is functional and individually controlled by two separate Trane Weathertron BAYSTAT240 thermostats. Set 1: Trane Weathertron: BAYSTAT240 Heat side Trane XE78: TUD080C936A1 (Date: 02/1993) Cooling side Trane XE78: TXCO36C4HPB0 (date H06) Heat...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

View more questions Search
 

Add your answer here.