I just replaced the sequencer for this heat pump. Did not take a photo of wires before switching to new sequencer. Does anyone have a photo or diagram of how this wires up? I think one of the small wires went to the wrong spot. Please help.
Add your answer here.
Check out some similar questions!
Setting low-temperature cut-out and balance point on Coleman Heat Pump [ 5 Answers ]
I have a Coleman HC3B heat pump. The local service technician showed me the jumpers for the low-temperature cut-out (LTCO) and balance point (BP). It appears to be a set of pins with labels decreasing in value by 5 (45, 40, 35, etc.) which I assume are the temperature. I would like to...
Coleman Evcon D.E.S. II Heat Pump- works intermittently [ 1 Answers ]
She's an old one... I'm guessing the late 70's or 80's, but since I've lived here (4years) it seems to work for a while, but then stop... I hear a fan blowing, but it's cold air. Then I look at the t'stat and the red emergency light is on... cold air coming out of the vents. I look at the unit...
Wiring Diagram for heat pump with gas furnace [ 1 Answers ]
75,000 BTU Concord furnace with 2 ton heat pump.. Chromatherm Thermostat and when the heat comes on both the heat pump and gas furnace are running... How do I correct the wiring malfunction so the heat pump initially comes on and the gas furnace comes on when the pump can't keep up or in the event...
Coleman heat pump covered in ice [ 2 Answers ]
We have a Coleman, electric heat pump system on a manufactured home. It is 7 years old. The entire outside unit seems to be frozen over. What is the problem? Is there any way to solve it?
View more questions Search