Ask Experts Questions for FREE Help !
Ask
    Walter703's Avatar
    Walter703 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 18, 2010, 10:34 AM
    White rodgers zone valve troubleshooting
    My 12s16 102 zone valve is not closing with thermostat setting change. How can I get a manual or t-shooting tips?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 18, 2010, 11:55 AM
    Need a better number. No such number listed.
    boiler1's Avatar
    boiler1 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 26, 2012, 01:43 PM
    I have a White Rogers Zone Valve Type 1311 and a basic Three (3) wire non-programmable rotary thermostat (Red, White & Yellow). The White Rogers wiring diagram shows hooking one wire from terminal 4 to thermostat, one wire from terminal 5 to thermostat and one wire from terminal 6 to thermostat.

    What are the wire colors associated with the terminal #'s 4,5, & 6?
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

White rodgers thermostat black and white wires [ 1 Answers ]

We have a very old white roger thermostat for our gas furnace and are replacing it with a honeywell rth2310. Our current thermostat only has two wire one balck and the other white. Where do I make the connections.

I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do? [ 1 Answers ]

Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do?

White Rodgers gas valve 36e troubleshooting [ 3 Answers ]

I have a Lennox G23 furnace with a White-Rodgers 36E24-204 NG valve that continually is tripping the limit switch, due to a condition where the pilot is putting out way too much flame. I can see areas on the plate where the limit / rollout switch sits, and the flame has deposited large amounts of...

White-rodgers thermostat [ 1 Answers ]

My white-rodgers thermostat read "81" and will not work, batteries have been changed, what is wrong with it?

Replacing White Rogers Zone Valve Power Head [ 1 Answers ]

I recently replaced the power head on a WR zone valve. The valve is working properly but since the change the heat, although hot, lacks any force coming from the base boards. I lost a small amount of water from the boiler when I replaced the valve and am wondering if I lost too much. If so how...

View more questions Search