Add your answer here.
Check out some similar questions!
Beckett model AFG burner flame-out [ 14 Answers ]
This season is the first time ever that this has happened. The furnace starts, gets a flame, runs for a while, then it flames-out. It sounds like the oil pump is still running (I hear like a spraying sound). Nothing shuts off. Then the flame will come on again, but may continue flaming-out...
Beckett burner starts has flame for about 15 seconds off for 12 then flame on & runs [ 7 Answers ]
I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...
Flame color on Burner Assembly? [ 1 Answers ]
What's the proper color of flame supposed to be comiing out of the burner assembly. My color is yellowish orange.
Carrier 58VUA80 Pilot flame fired but main burner doesn't come. [ 2 Answers ]
The furnace in my house (already installed in house before I bought) is a Carrier Weathermaker 58VUA80-101. Don't know if it's 9000 or what. When called for heat, (1) main blower turns; (2) Inducer motor turns; (3) Pilot flame fires; However main burner doesn't work. After many sparking it stops...
Burner flame engages on glow rod then kicks off [ 1 Answers ]
http://www.lucylou.com/ The glow rod is glowing, the flame engages across flow rod for approximately 3-4 seconds but the other four burners do no light (when I blow air on the flame it pushes the flame to the other burners & the burners stay for for a whole running cycle but will NOT engage for...
View more Heating & Air Conditioning questions Search