 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xl90 blower motor inop
I have a Trane XL90 furnace. The blower motor just hums when I turn it on heat or cool. I pulled the blower motor and housing out of the furnace and it works fine sitting on the basement floor but when I reinstall it into the furnace, it just goes back to humming. Any help would be greatly appreciated
|
||||
Check out some similar questions!
I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...
Trane XV80 Installed 2002 My blower does not come on; I turned t-stat to fan only; fan motor felt cold to touch and turns freely when spyn: defeateded the safety switch on front; checked voltage at the leads from the circuit board to fan motor for the white and black leads(124 v); Should I...
Had an AC salesman out today about replacing the upstairs unit. He was demonstrating "proper air flow" with the basement unit. He opened the furnace and the blower motor made a squealing noise when it came back on. He flicked the power off and then on again and the noise disappeared. He said it...
I went to start my furnace and my furnace was blinking 19 green and one red can someone please help me there is nouthing happing no blower no nouthing but flashing lights
Noticed last night that my Trane furnace was squeaking like a cricket when the air conditioner was running. Then every so often it would make an awful squealing sound like maybe a motor was getting stuck and unable to turn. From reading other posts I'm guessing that I might have a bearing or belt...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
