Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane XL20i heat pump requires Trane 900 series thermostat?
[ 2 Answers ]
Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.
Trane heat pump
[ 1 Answers ]
My wife and I recently purchased a home with two heat pumps in installed 6/05/05. The down stairs unit makes noise like a jet taking off. I asked the installer if we could slow the air volume down and he responded by saying the factory settings were not changeable. These were state of the art...
3 yr old heat pump, heat works, no cool
[ 10 Answers ]
I have a heat pump that was 3 years old in May. We went to change from heating to cooling about a month ago. I noticed later that it wasn't cooling. Checked and found it had tripped the breaker. Reset and instantly threw the breaker again. Called a friend that does A/C work on the side. We...
New Heat Pump does not turn off at temperature setting
[ 3 Answers ]
I purchased a heat pump from a national company and it was installed in early January, 2008. When the thermostat is set, it will not get to that temperature, but usually stays 2 degree under and runs constantly. Only once or twice has it cut off by itself at the desired setting, and then only for... View more questions Search
|