Ask Experts Questions for FREE Help !
Ask
    lulumania's Avatar
    lulumania Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2008, 06:11 PM
    thermostat replacement with honeywell rth6300b
    I have a trane weatehrtron - 7 wires from the wall and cannot find the right connection to the new honeywell rth6300b. I tried the wiring wizard and found I have 8 wired coming out of the wall and no place to hook them up... I end with the B, T , O and X2 left without a connection - help anyone?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 18, 2008, 06:44 PM

    Don`t think the rth6300b is designed for heat pump use, its single stage,, if I`m correct you need to shop for a heatpump tstat
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to connect wires to a RTH6300B honeywell thermostat [ 2 Answers ]

I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated

Thermostat wiring from Weatherton to Honeywell( RTH6300B) [ 4 Answers ]

I have an existing old time mercury thermostat ( Trane Weatherton) which I am replacing with programmable Honeywell RTH6300B. Its very confusing how to connect these wires as the Weatherton thermostat has the following wires: G- green O- orange X2 - White W - white (X2 and W jumperd) Y -...

Problem with New Honeywell RTH6300B Thermostat [ 5 Answers ]

We have a Frigidaire model B3BM-024K-A HVAC system. It is all electric. A few days ago, my husband replaced the old thermostat with a Honeywell RTH6300B programmable one. My husband wired it according to the instruction. It has a problem: the heat will not switch off automatically when the...

Honeywell RTH6300B Thermostat setup [ 1 Answers ]

I am trying to install a Honeywell RTH6300B to replace a Honeywell 3-wire thermostat. The wiring on the old thermostat is: Red wire – R terminal White wire – Y terminal Green wire – W terminal There are no other wires. The system is an oil burner with hot water baseboard heating. There...

Honeywell Programmable Thermostat RTH6300B [ 2 Answers ]

Since I live in Canada I want a programmable thermostat that uses celsius. Do you know if this model can be switched from Fahrenheit to Celsius? IF so how is this done? I've not opened the package since I wanted this anwer first. Thanks for your help.

View more questions Search