TH3210d1004 wiring

I have a Honeywell TH3210D1004 Thermostat and a carrier high efficiency heat pump? (I think , I included pics of everything), here's the deal I wired everything up and when I cut the circuit breaker back on the one that says "Heat" arcs outs and breaks off. I need help here... ...

Current thermostat Armstrong 35614B001) has why, G, O, W, are, C(blue wire) connections New thermostat (Honeywell TH3210D1004) has E AUX why G O L are B C connections How do the wires (Yellow, Green, Orange, White, Red, Blue) go to the new Honeywell thermostat?

I am replacing a Janatrol T-state with a Honey well Pro 300 M/n Th3210D104 the wires from the old one were wired as such; Wx2= white, Y= Yellow, G= green, O= orange, R= red, B= , C= blue, E= tan, (there was a non used black wire). The new T-state has the following; E, Aux, why, G, O, L, are, B,...

I am replacing a Trane Baystat 239 thermostat with a Honeywell TH3210D1004 thermostat. The Trane thermostat is wired is follows: Terminal Color of Wire X2 Black O Orange G Green Y Yellow T Tan R ...

My existing wires do not match new stat diagram