Ask Experts Questions for FREE Help !
Ask
    Alternative Plumbing's Avatar
    Alternative Plumbing Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2007, 07:30 PM
    Tempstar furnace 5100BFA2
    How do I turn the blower motor on permanently?
    Alternative Plumbing's Avatar
    Alternative Plumbing Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Sep 23, 2007, 07:35 PM
    How do I get the blower motor on permanently?
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Sep 23, 2007, 07:40 PM
    If you have a thermostat that has a fan switch on it you will have two choices either on or auto, switch to on and the fan should run all the time. If you don't have a on off switch tell us what you do have.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tempstar Furnace [ 2 Answers ]

I have a gas Tempstar furnace , The pilot ignites but the furnace does not it tries a few times then stops. The blower works . What might the problem be?

Tempstar furnace [ 6 Answers ]

I have an 80+ tempstar with the smartvalve gas valve. During the call for heat, the inducer motor starts, but the ignitor will not come on and light. I checked the ignitor and it is good. I checked for voltage and it is good. Could the gas valve be bad, since the ignitor is controlled by the valve...

Tempstar 5000 [ 1 Answers ]

I have a Tempstar 5000 A/C unit and would like to know the condenser size It's model # is ca5536uka1 so should I assume it is a 3 ton unit? Thanks Erik

Thermostat air conditioner wiring for tempstar gas furnace [ 2 Answers ]

I disconnected my thermostat from the gas tempstar furnace and also disconnected two wires I traced to the central air conditioner. I do not know where to connect the air conditioner black and white wires to on the W,Y,R,G,C. I do not have a manual. Can someone help me?

Transformer wiring of tempstar furnace [ 2 Answers ]

Hi Labman, I had a bad relay (LY2 24 VAC), so I marked the wires on piece of paper to take it off and install the new one. The problem that I lost the paper somehow and I don't have a clue how to install the new one. I know that the I/p is 120 VAC and the o/P 24 VAC. How ever I have 6-wires...

View more questions Search