Add your answer here.
Check out some similar questions!
Bryant 383KAV code 14 - flamesout x4 [ 4 Answers ]
Hello, I have a Bryant gas furnace 383KAV that is 7 years old. Currently the burners come on and then go off after a few seconds. After this happens 4x the furnace delays for 3hours. I thought the flame sensor might be dirty - but I cleaned it some and nothing came off. That didn't help. Filter...
Bryant 330AAV Code 34.every now and then. [ 2 Answers ]
Wanted to know if anyone could help me troubleshoot this problem.. This furnace will not fire up (every now and then), basically what happens is the igniter lights up, but will shut down after 5 seconds or so. It will do this three times until it goes into lock down, code 34 flashes. I reset...
What are Bryant 80 Plus Heater LED Status Code [ 3 Answers ]
What are the status codes that flash on the LED on a system that will not turn on.
Error codes on bryant gas pac [ 1 Answers ]
This is for Northernheat ----- you told me to clean my flame sensor and so I did and also cleaned the place that it is attached and put a ground wire from the screw to the ground screw on the board post to make sure and I still get a code of 8 flashes that said it detected an error in the soft or...
Bryant 310AAV code 23 [ 8 Answers ]
I found your forum after having some issues with my furnace. Age is unknown because I rent and my landlords are out of town. When I went to turn the furnace on tonight, nothing happened. House temp registering 68-69 at thermostat, furnace doesn't kick on when adjusted to 72. Fan will turn...
View more Heating & Air Conditioning questions Search