Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Controlling a duct fan with thermostat
[ 6 Answers ]
I need to control an in-line duct fan with a thermostat. Since the thermostat I have (a basic Honeywell non-programmable heat/cool) requires 24v and the duct fan runs on 110v I'm assuming I will need some type of relay that provides 24v for the thermostat and 110v for the fan. Hopefully, there...
In Line Duct Fan Power To Blower
[ 2 Answers ]
Hi there I have a frgidaire furnace and need to add a duct fan and power to my blower motor. I need to know if anyone can tell me if I jump the blue wire or the black for the power feed?
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
Bathroom fan - no duct?
[ 5 Answers ]
I wanted to see why the smell in the bathroom was not going away, and I opened the fan grille and noticed that the bathroom fan has no duct. Inside the grille is just a small box with a fan blowing upwards into it, but there is no way for the smell to escape by means of a tube to the roof. ...
Flexi Duct vrs Aluminum Duct
[ 4 Answers ]
I am adding an addition onto my house. The local building inspector has already told me my HVAC unit is more than adequate in size to support the addition. The old duct vents are aluminum. Can or should I use flexi venting in the new part? What are the pros and cons of these two types of vent... View more questions Search
|