 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cycle circuit breaker to start Coleman Electric
Have a 30 year old Coleman Electric. Thermostat is flashing indicating relay (energy efficient) closed. Cycling one set of two 30 amp circuit breakers get the furnace running again. The dual breaker does not feel like it is tripped. But maybe one side could be tripped. Was thinking about changing out the breaker or could it be the low voltage to the thermostat or one of the relay's?
|
||||
Check out some similar questions!
I have a 240Vac Stove 4 prong outlet. The wiring to the receptacle is fully installed. Stove not working properly. I pulled out my meter and I measure 120 from L1 to Ground and 120 from L2 to Ground, I measure 0V between L1 and L2. How can I correct this to 240 between L1 and2?
I have an electric well pump which trips the circuit breaker. The pump does not seem to work. I can reset the breaker but it trips again after five minutes or so. Do I have a pump problem or an electrical problem?
I have a Coleman 3300L823 (23Kw /78,000 BTU) furnace and every 4 or 5 hours the lower circuit breaker goes off. Once I reset the breaker, it works for several hours and then goes off again. The weather has been very cold these last couple of days and I am wondering if it has anything to do...
What size does circuit breaker does electric dryer need
What size circuit breaker does a electric dyer need
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
