Check out some similar questions!
Bryant Furnace Problems
[ 1 Answers ]
I have a 1982 Bryant 397HAW360100 model furnace. It has been acting funny and seems to be getting continually worse. It does run and does heat, but the issues I'm having is that the burners continually kick on and off. Generally now, the burners fire for about 2 seconds then shut off about 2-3...
Bryant furnace problems
[ 0 Answers ]
Furnace is 5 yrs old, have reset it , thermostat goes blank, blower continues to blow but only cold air. When try to restart it, it may run for 5 minutes, then goes off and blows cold air again. Replaced fuse, shut off circuit breaker and restarted, but continues to not run. Filter is clean, no...
Bryant furnace problems
[ 11 Answers ]
I have a Bryant Plus 90t Furnace installed in 2007 and the Flame Sensor keeps getting corroded it had to be cleaned three times since installed in 2007 I have no heat until it is cleaned. My question is why does it keep getting corroded. Thank You Nick [email protected]
Bryant Furnace Problems
[ 3 Answers ]
I have a Bryant gas furnace Model Plus 90i 355MAV. When it runs in high heat mode for several minutes it makes this thumping sound that seems to be coming from the blower area, after a couple of seconds the furnace shuts down. Any Help? Unit is about 6 years old
Bryant Furnace problems
[ 14 Answers ]
Hello everyone, I have a Bryant 80v furnace. Everything works fine till it is time for the blower fan to come on. I have opened it up, and the fan wheel turns freely. Checked the fuse on the circuit board no problems there. I been doing some reading about it all day long. The furance lights and... View more questions Search
Add your answer here.
|