 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi, I bought a Honeywell RTH 2300 thermostat and I'm trying to hook it up, the wires I have coming out of the wall are white, green, red, yellow and blue. I hooked up the matching colors to the W, G, R, Y and the blue wire I attached to the O/B. I have the jumpers set as follows: jumper 1 HG and...
I have electric heater and a air conditioning unit, I do not have a heat pump. I wired my Honeywell RTH6300B thermostat I removed the jumper as per the instructions in the installation guide. I put the red wire in the RC connector slot I put the blue wire in the R connector slot, I put the yellow...
I have an old Honeywell thermostat (model T874C1000) and want to install a new Honeywell RTH7000. The old one had 2 mercury switches for the heat and one merc switch for the a/c. As the outside compressor indicates Heat Pump, I'm assuming I have a 2-stage heat pump system. The wiring...
Need part no. and location of dealer for replacement filters, as my filter light is on. Also need instructions on replacing.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
