Ask Experts Questions for FREE Help !
Ask
    cynthchlbrg's Avatar
    cynthchlbrg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2010, 10:31 AM
    York diamond 90 furnace flashing 3 times need led status code to correct?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 11, 2010, 10:51 AM
    Is the codes not posted on inside of door/cover? If not I doubt anyone can help you without a model number off the furnace
    exitxidrummer's Avatar
    exitxidrummer Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Dec 16, 2010, 09:50 AM
    The code means loss of flame more than 5 times in a single cycle. Probably the flame sensor is dirty or needs replaced. You can try pulling it out and cleaning it off with some fine steel wool or a scotch brite pad and put it back, if that doesn't work I'd replace it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My carrier furnace LED light is flashing a code. How do I tell what code it is? [ 1 Answers ]

The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?

My York Gas Furnace isw flashing 3 times. [ 1 Answers ]

My furnace is flashing 3 times. We've replaced the pressure switch. Still doesn't work. Now what?

YORK Diamond 90 Furnace code 7 [ 2 Answers ]

YORK Furnace Diamond 90 Model P3URB10N05501D Shows a code 7 What do I do now?

York Diamond Flashing Error Code [ 3 Answers ]

I have a york diamond 8o it haves a white rodgers broad model # 50a50-241 The led ligth flashes 8 times can you tale me what that error code is. Thank you for your help.

York furnace red LED blinks 4 times [ 0 Answers ]

York furnace will light, but blower never turns on and red LED on main board blinks 4 times. Is there an easy fix?

View more questions Search