Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heating element Kenmore 70 series electric dryer
[ 6 Answers ]
When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...
Dishwasher Heating Element
[ 1 Answers ]
Does anyone have instructions to replace the heating element for a Kenmore Ultra Wash dishwasher?? I would like to do this myself. Thanks, Terri
Kenmore Dishwasher heating element
[ 1 Answers ]
I need to replace the heating element in my 665.16512 Kenmore Dishwasher but I don't know how to remove the old one. Any hints?
Heating element stays on after drum stops
[ 8 Answers ]
To stop the dryer we often open the door. When I open the door the drum stops turning. The heating element remains on. If I turn the timer to off the heating elelment will go off. If I set the timer to on the heating element starts immediately before pushing the button to start the drum. What...
How can I get enamel off heating element
[ 1 Answers ]
Hi, I have a problem here. I left kettle on the electric stove for too long:( All the water boiled out & as a result the enamel from the kettle melted onto the heating element of the stove. Now I have enamel on the heating element. Any idea how I can get it out ? Thank you so much. Your help... View more questions Search
|