 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am trying to replace a Rheem thermostat with a Honeywell digital RTH7500.
I am trying to replace a Rheem thermostat with a Honeywell digital RTH7500. The wires I have are:
G - green R - red Y - yellow B - white X - brown W2 and E (jumped with a black wire) Can someone help me with the correct wiring? The manual doesn't tell for these wires. |
||||
Check out some similar questions!
I have a hunter 40035A thermostat that I'm replacing with a Honeywell RTH7500. Coming out of my wall I have Y W G RC (color is actually blue) RH The RC wire is not connected just capped off The Y, W, G, RH all go to the correct identified places on the Hunter thermostat. There is a...
Hello, I am trying to install a new Honeywell RTH7500 thermostat to replace my Robertshaw 9200 thermostat. The Robertshaw 9200 had the following connections: One yellow wire that was connected to W and Y (the wire is long and was threaded underneath the screws in the W and Y connections);...
I am replacing my old thermostat a Trane BAYSTAT240A with a honeywell RTH7500 series one. There were eight wires on my old W- B- X2-Y-G-O-R-and a T. There is no spot to hook up the T wire although I got the unit to work. Right now the biggest problem is I can't read the display good because the...
The old RUUD thermonstat wiring has G R B Y W2 X The honeywell Programmable has the following wiring. C AUX G E Y L
I am trying to replace our current Weathertron THermostat with a Honeywell. We have a heat pump with auxiliary heat and central airconditioning. All the wires matched except the Weathertron had a "T" wire and there is no corresponding connectiion that has a "T" on the Honeywell. I have the "B"...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
